Double offset bath supply lines are used when you have 8" centered inlets with a 3"- 4" tub valve. Available in different finishes to match your bathroom needs. Made for the old clawfoot tubs, with 1/2" size tubes. Includes nuts and washers. 1/2 IPS x 3/4 IPS.
Straight Supply Lines
Straight supply lines are used when installing a rim-mount clawfoot tub faucet. These copper lines are available in different finishes and sold in pairs 1/2 OD x 21" long. Comes with 3/4" IPS nuts and 1/2" IPS nuts (use
Single Offset Supply Lines
Supply lines with single offset. Sold in pairs 1/2 OD x 21-30 inches long. Includes supply tubes, connection nuts and washers. This is used when you have a Deck mount claw foot tub you want to put a faucet on. The distance from center to center on a clawfoot tub is 3 1/2" inches at the floor and 3 3/8" at the faucet or it can be any size you want it to be: 7 Inch is commonalso.
Single Offset Freestanding Supply Lines
These free-standing clawfoot tub supply lines measure 26" tall. Includes matching stops with porcelain handles labeled "HOT" and "COLD." The inlets are 1/2 IPS.
Clawfoot Tub Faucet Ell Pair
These clawfoot tub faucet ells are used to connect the clawfoot tub faucet to 1/2" IPS flex water supply lines. These are not necessary if installing offset bath supplies. 3/4" female x 1/2" male IPS, strong brass with chrome finish. Includes one pair.
½ (5/8) copper Pipe X ½ Compression Straight Stops CROSS HANDLES
½ (5/8) copper Pipe X ½ Compression Straight Stops LEVER HANDLES
½ IPS Pipe X ½ Compression Straight Stops CROSS HANDLES
½ IPS Pipe X ½ Compression Straight Stops LEVER HANDLES
The stops are sold individually with interchangeable "hot"/"cold" buttons with 1/4 turn ball valve with a Teflon seat. They can handle up to 125 PSI.
A variety of finish options to match your bathroom. They come with a lever or cross handle. Note you will want to buy them in PAIRS as you will need 2 for each tub . If you have a pex or CPVC pipe coming into your tub your will want to add an adaptor from Pipe to ½ IPS male to it.
1/2 IPS X 1/2 Compression Straight Stops Standard Stops